Uniden BC296D User Manual
Page 38
3:MODE
Select, then set the modulation mode to use while
searching the custom range. If you select 5:AUTO,
the scanner will use the modulation mode most often
used for each band.
4:ALPHA TAG
Select, then assign an alpha tag to the search range.
5:TRUNK
See “Searching for Trunk Systems.”
4. Press MENU/BACK, then repeat Steps 2 and 3 for
additional search ranges.
Searching for Trunk Systems
1:SEARCH OPTION
→ :CHAIN SEARCH →
2:SEARCH RANGE
→ Select the range → 5:TRUNK
This option lets you search for a Motorola trunking control
channel within the selected range. To activate this function,
select 1:ON, then select an appropriate trunk plan. Most areas
use Plan 1, so this setting should work in most cases.
Note: This feature only works for 800 MHz and 900 MHz
Motorola trunking systems.
If the scanner detects a trunking control channel, it will begin
to track that system. The scanner displays the talk group
numbers as they become active.
32
BC296D(NEW) 10/16/03 6:35 PM Page 32