Adjusting the audio tone, Finding a lost handset, Using hold, conference and transfer – Uniden DECT2060 User Manual

Page 36: Placing a call on hold, Adjusting.the.audio.tone, Placing.a.call.on.hold

Adjusting the Audio Tone

If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on

a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.

recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.
To.adjust.the.audio.tone:

While.on.a.call,.press.

[Menu/Select].

Move.the.cursor.to.select.AUDIO.TONE,.and.then.press.

[Menu/Select].

Move.the.cursor.to.select.desired.option.(HIGH.TONE,.NATURAL.TONE,.or.LOW.TONE),.and.then.press.

[Menu/Select]..Selected.option.appears.in.the.display.for.two.seconds,.and.then.the.display.returns.to.normal.

Finding a Lost Handset

To.locate.a.misplaced.handset,.press.

[find hs].on.the.base.when.the.phone.is.in.standby..The.handsets.connected.

to.the.paging.base.will.beep.for.one.minute,.and.PAGING.appears.on.the.handset.display..To.cancel.paging,.press.

[find hs].again.or.any.key.on.the.found.handset.
Note:.. Handsets.that.are.not.currently.connected.to.this.base.will.not.be.paged.

Using Hold, Conference and Transfer

Placing a Call on Hold

During.a.call,.press.

[Clear/Int’com].on.the.handset.to.place.the.caller.on.hold..If.you.leave.a.caller.on.hold.for.

more.than.ten.seconds,.the.display.screen.will.read,.Line.On.Hold.
To.return.to.the.party.on.hold,.press.

[ /Flash].or.[

].on.a.handset..The.phone.will.return.to.the.holding.party.

Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be

disconnected.and.the.phone.will.return.to.standby.

•.While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.

)
2)
3)

)