Ultratec 4425 - Manual (Page 68)

Setting the date and time +
Follow these steps to set the clock:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see CHANGE CLOCK (NO) on
the display.
3. Press the key to change the setting to YES, then press
the key. The display shows the date and time, with the
month blinking.
4. Press the or the key to change the month.
5. Press the key to move to the day.
6. Repeat steps 4 and 5 to change the day, year, and time.
If you only want to change part of the setting, you can press the
key twice at any time to leave options.
Saving a relay voice announcer
number
+
Follow these steps to add your relay service telephone number to
the relay voice announcer message:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see EDIT RELAY NUM (NO) on
the display.
3. Press the to change the setting to YES.
4. Press the key. You will see RELAY on the display.
5. Type your relay service telephone number. Use the
key to correct typing mistakes.
6. Press the key. You will see RELAY NUMBER SAVED on
the display.
7. Press the key to leave options. Esc
Return
Backspace
Return
Spacebar
Return
9 Ctrl
9 Ctrl
Esc
Return
Backspace Spacebar
Return
Spacebar
Return
9 Ctrl
9 Ctrl
66 • OPTIONS