Ultratec 4425 - Manual (Page 39)

ADVANCED CALLING • 37
Three-way calling + +
If your telephone service includes three-way calling, the
Superprint 4425 three-way calling feature lets you put one call on
hold, call another number, and carry on a conversation among
three people. Follow these steps to use the three-way calling
feature:
1. Call the first number and begin your conversation.
2. Place the first person on hold by pressing the key, the
key, and the key
( + + ).
You will see HOOK FLASH on the display followed by TYPE
NAME, NUM, OR CR.
3. Dial the second number and begin your conversation.
4. Press + + to reconnect to the first person. You
now have a three-way calling conversation.
If the second number is busy, press + + to reconnect
with the first person.
You must have three-way calling service from your telephone
company to use this feature.
Note: If someone calls you to set up a three-way conversation, you
should press
+ + to be sure that you are using Baudot
(45) code. You may have originally connected in Turbo Code and
all three people in a three-way conversation must be using Baudot
(45) code.
Transferring a call
+
Office telephone systems vary widely and specifics of how to
transfer a call will be different for each system. Most telephone
systems require a hook flash to transfer a call. On the Superprint
4425, typing an ! when you are dialing sends a hook flash. Here is
an example of the steps required to transfer a call while you are
on the line with another person:
1 Ctrl
B Shift Ctrl
F Shift Ctrl
F Shift Ctrl
F Shift Ctrl
F
Shift Ctrl
F Shift Ctrl