Using the master power key – Universal Electronics Atlas DVR/PVR 5-Device User Manual
Page 20

www.urcsupport.com
20
USING THE MASTER POWER KEY
The Atlas DVR/PVR 5-Device Universal Remote Control 
with Learning has a unique feature that allows you to 
sequentially turn up to five of your home entertainment 
devices on or off with a single key press. 
NOTE: 
MASTER POWER (PWR) only works in the CBL 
mode. If it is not programmed, only the cable 
converter will turn on or off. In any other 
mode, pressing MASTER POWER (PWR) once 
will turn the selected device on or off. 
Programming the Master Power Key
5.
Repeat step 4 up to four more times to add the 
second, third, fourth, and fifth device, as 
desired. 
6.
To save the settings and exit the program:
Using the Master Power Key
You will see the devices turn on or off according to the 
programmed sequence.
1.
On the remote control, press and hold SETUP 
until the last-selected device key blinks twice.
2.
Enter 9 9 5. The last-selected device key 
blinks twice.
3.
Press PWR once.
4.
For the first device you want in the power on 
sequence, press a device key (e.g., CBL) once. 
Then press PWR once. 
a.
Press CBL once.
b.
Press and hold SETUP until the CBL key blinks 
twice. 
1.
After programming, point the remote control 
at the devices. Press CBL once. 
2.
Press PWR once to sequentially turn the 
programmed home entertainment devices on 
or off. 
