Universal Electronics C6 - Manual (Page 16)

Channel Control Lock
The Kameleon-C6 Remote includes a program-
ming feature that allows you to program the
remote’s channel control capabilities to be locked
to the cable converter using the following keys:
0~9, CH+, CH-, ENTER,and LAST*. This will
guarantee that you do not inadvertently change a
channel on your TV or VCR.
This feature is de-activated by default and can be
activated or de-activated by following the steps
below.
*NOTE: T HIS FEATURE DOES NOT AFFECT THE AUD OR AUX MODES .
TO ACTIVATE CHANNEL CONTROL LOCK
1. Press CBL device mode key once. It will blink
once.
2. Press Setup until the CBL key blinks twice, then
release Setup.
3. Enter 9 7 3.The CBL key will blink twice.
4. Press CH + once. The CBL key will blink two
times.
5. Now, regardless of what mode you select
(except AUD or AUX), only the channel control
capability of your cable converter will be
accessible.
TO DE-ACTIVATE CHANNEL CONTROL LOCK
1. Press CBL device mode key once. It will blink
once.
2. Press Setup until the CBL key blinks twice, then
release Setup.
3. Enter 9 7 3.The CBL key will blink twice.
4. Press CH- once. The CBL key will blink four
times.
5. Now, the remote control will provide TV and
VCR channel-control capabilities while in the TV
or VCR mode.
16 Channel Control Lock
K
AMELEON
-C6 R
EMOTE
Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 16