Uniden 8950 - Manual (Page 39)

36
If the handset battery pack
is completely discharged,
or the battery pack
removed, the digital
security code is erased.
If this happens, a new
security code is set
automatically the next
time the battery pack is
charged.
ADDITIONAL
INFORMA
TION
The digital security code is an identification code used to connect
the handset and the base unit. Normally, setting the code is not
necessary.
The first time you charge your handset, the security code is
automatically set. (See page 3.)
In the rare situation that you suspect another cordless telephone
is using the same security code, you can change the code.
1
Remove the handset from the base
unit. Press .
2
While the handset is producing the
paging sound, hold
while placing the handset in the base
unit. The paging tone stops.
Leave the handset on the base for at
least 3 seconds. A new random
security code is set.
page/int'com
Changing the digital security code
page/int'com
EXLA8950 5th HEN 99.8.20 2:46 PM Page 39