Setting ring time switch – Uniden 8950 User Manual

Page 32

Text mode
Original mode

Setting ring time switch

The ring time /toll saver switch
allows you to set the number of
rings the caller hears before the
answering system plays your
outgoing message. You can set
the switch to answer after two
rings or after four rings.
In the

(Toll Saver) position, the answering system picks up after

two rings if you have new messages, and after four rings if there are
none. This way, if you call long distance to check your messages,
you can hang up after third ring to avoid billing charges.

RING TIME

2/4/TS

EXLA8950 5th HEN 99.8.20 2:46 PM Page 32