Uniden UH037SX-2 - Manual (Page 6)

SELECTING A CHANNEL
Press channel or to select the
desired channel.
TO TRANSMIT AND RECEIVE
The UH036SX uses the 40 UHF-CB Channels. For your
reference a list of the available channels and corresponding
frequencies is printed on page 10.
1. The transmit power of the
UH036SX is 500mW which will
provide a range of up to 3+Km.
2. Before you transmit, listen for
activity on the selected channel.
3. When the channel is clear, press and hold the
to transmit. appears on the LCD. TX
Hold the radio with microphone approximately 5 cm in
front of your mouth with the antenna at approximately 45°
angle away from your head. Speak in a clear, normal
conversational voice.
PTT
5
mic
vol/
mon
ch/
scan
dup
mic
vol/
mon
ch/
scan
dup
PTT
Switch
4. When you have finished speaking,
release the . then disappears on
the LCD. Listen for a response.
TX
PTT
TX
While receiving, the RX icon is displayed.
UH037SX
PTT
PTT
(Channels 22 and 23 are for telem-
PTT
Switch
etry and telecommand applications. Transmit is inhibited on these channels).
UH037SX