Uniden DS71 - Manual (Page 24)

The pause button count
as one digit. Pressing
redial/p more than
once increases the length
of pause between numbers.
22 22
To use the mute feature during a
conversation, press
mute . The other party will
not be able to hear you although you can hear
them. To disable the mute feature, press
mute
again.
1. Remove the handset from the base.
2. Press mem . The talk LED blinks.
3. Enter the phone number, up to 16 digits.
If a pause is needed during dialing
to access long distance service, press
redial/p to insert a pause.
4. Press mem again.
5. Enter the memory location (01-20) on the keypad. A tone indicates that
the number is stored.
▼ Using the memory location features
1. Press talk.
2. Press mem.
3. Enter the memory location (01-20). The number automatically dials.
1. Remove the handset from the base unit.
2. Press mem button twice.
3. Press the memory location (01-20) to be erased.
A tone indicates that the stored number is erased from memory.
ERASING A STORED NUMBER FROM MEMORY
DIALING A NUMBER IN MEMORY
talk
mem redial/p
STORING A PHONE NUMBER IN MEMORY
MUTE