Uniden DCX200 Series - Manual (Page 5)

4
Registering the Handset
You must regster the handset to the base before you can use t.
Only one handset can be regstered at a tme. (If an accessory
handset has ever been regstered to a base, you must reset the
handset before you can regster t to a new base.)
To regster to a DECT2000
seres base, place the
accessory handset n the base.
Whle the handset s regsterng,
HANDSET REGISTERING
appears n the LCD. When
REGISTRATION COMPLETE s
dsplayed, the handset has been
regstered to the base.
If REGISTRATION FAILED
appears, pck up the handset
from the base and try agan.
Resetting the Handset
If you want to regster the handset to a dfferent base or replace
a handset with another one, you must first clear the registration
nformaton from the base and the handset.
Press and hold [ ] and [#]
for at least five seconds, until the
SYSTEM RESET menu appears.
Select the DEREGISTER HS
submenu by pressng [Menu/Select].
WHICH HANDSET? appears n the
dsplay.
Use [
] or [ ] to select the handset ID to be de-regstered
from the lst, and then press [Menu/Select]. DEREGISTER
HS appears.
Press [
] to move the cursor to YES, and then press
[Menu/Select]
. You will hear a confirmation tone.
)
2)
3)
4)
Extra Handset
Extra Handset
Charger
Charger
Main Base
Extra Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the extra handset
in the main base to
register.
1
2
3
4
R e g i s t r a t i o n
C o m p l e t e .
B a s e # 1
Extra Handset
Extra Handset
Charger
Charger
Main Base
Extra Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the extra handset
in the main base to
register.
1
2
3
4
R e g i s t r a t i o n
C o m p l e t e .
B a s e # 1
9JKEJ*CPFUGV!
*CPFUGV
*CPFUGV 9JKEJ*CPFUGV!
*CPFUGV
*CPFUGV
DCX200.indd 4 2007/07/04 13:51:46