Unisar Prenatal Heart Monitor User Manual

Page 13

DISCLAIMER

BÉBÉSOUNDS

PRENATAL HEART LISTENER™ IS NOT A

MEDICAL DEVICE

BÉBÉSOUNDS

IS NOT A MEDICAL DEVICE, AND SHOULD NOT

BE USED OR RELIED UPON IN ANY WAY FOR DIAGNOSTIC OR
OTHER MEDICAL PURPOSES. Any concerns about your pregnancy
should be addressed to a medical practitioner. BébéSounds

Prenatal Heart

Listener

is not intended to be and should not be used as a substitute for

regular prenatal care by an appropriate medical practitioner. You are
encouraged to seek such prenatal care in connection with your pregnancy.
The BébéSounds

Prenatal Heart Listener

should be used only in accordance

with the instructions provided herein, and the manufacturers and distributors
of BébéSounds

Prenatal Heart Listener

are not responsible for inappropriate

use. The manufacturer expressly disclaims liability for incidental
consequential, or special damages of any nature.

LIMITED PRODUCT WARRANTY
BébéSounds

Prenatal Heart Listener

, distributed by UNISAR Inc., has

a limited warranty against defects for a period of 90 days from the original
date of purchase.

In-Warranty Procedure

In the event service is required due to defect or malfunction during the
warranty period, UNISAR Inc. will replace or repair the product under
warranty. The repair or replacement of the defective item is subject to
verification of the malfunction or defect when delivered to:

UNISAR Service Center

15 West 36

Street

New York, NY 10018

RECORD AND EMAIL YOUR BABY’S HEARTBEAT WITH
YOUR COMPUTER

1. Locate the recording cable. Plug the L shaped end of the

recording cable into one of the available jacks on the Prenatal Heart
Listener

monitor. Plug the other end into the microphone jack on

your computer. This is indicated by a picture of a microphone near
the jack or the jack is color coded pink on the back of your computer.

2. On your computer go to START, PROGRAMS, ACCESSORIES,

ENTERTAINMENT (or MULTIMEDIA), SOUND RECORDER.

3. Set up your Prenatal Heart Listener

for listening to your baby.

Press the red recording button in the SOUND RECORDER program
to begin recording a 2 minute sound file. Press the Prenatal Heart
Listener

monitor against your tummy and hold down the activation

button on the monitor. You are now recording your baby’s sounds.

4. After 2 minutes the recording will finish. Name and save your sound

file to an appropriate folder. You can now email your sound file to
family and friends.