Changing the fan modes – Universal Remote Control (URS) Thermostat THZ-100 User Manual
Page 26
Page 26
THZ-100 T
HERMOSTAT
Turning the Thermostat Off
If you desire to turn the HVAC system equipment off then use the
arrow keys to move the highlight bar to Climate Control Off.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this new mode. If you decide
to cancel the operation then press the key below the Cancel key
label in the smart-key label at the bottom left of the display.
If the Climate Modes screen times out and goes back to the main
screen without pressing the OK button, no change is made to the
climate mode.
In the Climate Control Off mode, the thermostat does not activate
the system equipment to cool or heat your home.
Changing the Fan Modes
If you desire to change the system fan mode between on
continuously, periodic cycling, or automatically on when heating or
cooling is on, use the arrow keys to move the highlight bar to Fan
Modes. The current state of the fan displays in the right column.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this new mode. If you decide
to cancel the operation then press the key below the Go Back key
label in the smart-key label at the bottom left of the display.
Selecting Fan On Continuously
If you desire the system fan to operate continuously then use the
arrow keys to move the highlight bar to On.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this new mode. If you decide
to cancel the operation then press the key below the Cancel key
label in the smart-key label at the bottom left of the display.