Universal Remote Control (URS) Thermostat THZ-100 - Manual (Page 19)

Page 19
THZ-100 T
HERMOSTAT
Selecting Hold
If you desire to hold a particular desired temperature indefinitely,
use the arrow keys to move the highlight bar to Hold.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this new mode. If you decide
to cancel the operation then press the key below the Go Back key
label in the smart-key label at the bottom left of the display.
Alternately, if you let the programs screen time out with Hold
highlighted, by the highlight bar, the hold mode is selected.
On the main screen, Hold displays above the current temperature
information. In addition, a Hold Off short cut key is displayed in
the smart-key label at the bottom right of the display. Pressing the
Hold Off key turns the hold mode off.
The main screen also has the short cut key on the bottom right to
activate the Hold mode without having to go to the Programs
screen. This key toggles between Hold and Hold Off.