Uniden Radio - Manual (Page 13)

10
and sets the Alarm Clock tones to start again in 8 minutes
(press any other key to reset the Alarm until the alarm
time is reached again).
11. volume/on/off Turns the Weather Radio's receiver ON and OFF.
Sets the Volume level for NWR broadcasts. The receiver
must be ON in order to use the Weather button or to
receive alerts.
12. Speaker
NOTE: If the Emergency/Weather Radio is turned OFF while alert messages
are active, the active alerts will be deleted.
NOTE: When the WX500 is sounding NWR Alert tones, buttons do
not perform their normal functions. Instead, they stop the
Alert tones.
1. 14-Segment Characters : Displays Time, Alert information, and Menus
2. Low Battery Icon : Indicates when the Backup Battery needs to be
changed.
3. Menu Icon : Indicates Menu programming is active.
4. NOAA Icon : Shown when the Weather Radio receiver is ON,
extinguished when the Weather Radio is OFF.
5. Tone Icon : Indicates that the Alert Method is set to TONE.
6. Voice Icon : Indicates that the Alert Method is set to VOICE.
7. Alarm Icon : Indicates that the Alarm Clock is set to sound
Alarm tones.
If the NOAA icon is ON but the TONE and VOICE icons are OFF, the
Weather Receiver is available (ON) for listening to NWR broadcasts and
the Alert Method is DISPLAY (Alerts will be displayed, but no Alert tones
will be sounded).
WX500 web OM final.qxd 07/15/2002 4:30 PM Page 10