Uniden TCX4 User Manual

Page 4

–

Step 2: Connect the Charger

Connect the AC adapter to
the DC IN 9V jack and to a
standard 120V AC wall outlet.

Set the charger on a desk or
tabletop, and place the
handset in the charger with
the LCD screen facing
forward.

Make sure the charge LED
illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that
the handset makes good contact with the charger charging contacts.

• Use only the supplied AD-0005 AC adapter. Do not use

any other AC adapter.

• Place the charger close to the AC outlet so that you can

unplug the AC adapter easily.

Charge the handset for 15 hours before using.

Step 3: Register the Handset

YOU NEED TO REGISTER THE TCX4 SERIES TO THE MAIN BASE BEFORE
USE!

For Main Base Models CLX465 and CLX485

Before registering the extra handset, the battery pack MUST be
charged for 15 hours.

With the main base in standby mode (i.e., not being used), place
the expansion handset in the main base to begin registration.

While the handset is registering,

Ha nd s et Re g is t er in g

will

appear in the LCD. When

Re g is tr a ti o n co m pl e te .

is displayed,

the handset has been registered to the base.
If

R eg is t ra t io n f a il ed .

appears, please try these steps again.

UU893BH_TCX440.fm Page 4 Monday, September 5, 2005 11:49 AM