Uniden uh012sx - Manual (Page 9)

UNIDEN Model uh012sx UHF CB Radio
Operation
TX BUSY
A S C Technolog
Advanced Signal Clari
CTCSS
TX
A S C Technolog
Advanced Signal Clar
CTCSS
BUSY
8
Operating the uh012sx in Duplex Mode
For this example we are adopting CH01 as the channel being used in your area for
repeater use.
Press to switch Duplex On.
"r" (for repeater) is displayed in place of
the 1st digit of the channel number
indicator. e.g. 01 : normal channel 1
r1 : duplex channel 1
If Duplex is not required - press
again to switch Duplex off.
Only channels 01 - 08 are
available for Duplex.
The uh012sx has a scanning feature that allows you to search for active channels
automatically.
Press and Scanning starts.
Allows continuous scanning of all channels in ascending order.
If an active channel is found, scanning will stop on that channel.
If the received signal ceases, the unit will wait 3 seconds for the signal to return,
otherwise scanning resumes.
To deactivate SCAN, press or the PTT button on the microphone.
Check with your local Retailer for
information on available repeaters.
If SCAN is deactivated while on
an active channel, the uh012sx
will stay on that channel. If no channels
are active, the uh012sx will reinstate
the starting channel.
Scanning (open scan)
Open Scan (OS) Mode