Uniden DSS 2405 - Manual (Page 4)

1 Press down on the battery cover
release and slide the cover down
until it comes off.
2 Install the batteries supplied
with your phone. Check for
correct (+ -) polarity.
Installing the AA Batteries
– 3 –
1 Connect the AC adapter to the
DC IN 9V jack and to a
standard AC wall outlet.
2 Set the charger on a desk or
tabletop, and place the
handset in the charger with
the keypad facing forward.
Route the cord.
To AC outlet
AC adaptor
(supplied)
To DC IN 9V
Connect the Charger
Use only the supplied AAD-600S AC adapter. Do not use
any other AC adapter.
3 Make sure the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in
and that the handset makes good contact with the charger
charging contacts.
UU827BH ENG (DSS2405) 8/6/03 11:07 AM Page 3