Selecting the sound enhancement (e.a.m.*), Selecting the sound enhancement – Toshiba SD-330ESB EN User Manual
Page 40
40
Advanced playback
Normal:
Normal sound.
3D*:
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue*:
To control dynamic range to make
dialogues easier to hear.
• To use this enhancement on
sounds output from the
BITSTREAM/PCM AUDIO OUT
jack, be sure to set “Audio Out
Select” to “PCM”.
61
* Effective only during playback of
Dolby Digital recorded discs.
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch the sound enhancement to your preference.
*E.A.M.: Enhanced Audio Mode
ENTER
2
1, 2
Selecting the sound enhancement
Press E.A.M.
The sound enhancement selection
appears.
Select the sound enhancement by
pressing E.A.M. or / .
Each time you press the button, the sound
enhancement changes.
2
1
To exit the audio enhancement selection
Press ENTER.
Alternatively leave the DVD video
player unoperated for about 5
seconds after having made the
selection.
Notes
• Actual effects to sounds may vary depending on the
speakers. Make the selection to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Surround Pro Logic, select “Normal”.
Otherwise, Dolby Surround Pro Logic may function
differently than usual.
• Selecting “Dialogue” disables “Dynamic Range Control”
function
61
.
E.A.M.
ENTER
Manufactured under license from QSound Labs, Inc. U.S. patent
Nos. 5,105,462, 5,208,860 and 5,440,638 and various foreign
counterpart. Copyright QSound Labs, Inc. 1998-2002. QXpander
TM
is a trademark of QSound Labs, Inc. All rights reserved.
DVD