Teac SR-100I - Manual (Page 18)

18
Note for iPod touch
If you want to hear the sound of video from an iPod
touch, connect the iPod touch to the dock first, then
operate SR-100i and the iPod touch.
Stopping playback temporarily
(Pause mode)
During playback, press the Play/Pause (
G/J) button.
Playback stops at the current position.
To resume playback, press the Play/Pause (
G/J) button
again.
To skip to the next or previous track
During playback, press the Skip (
.//) button
repeatedly until you find the desired song.
The selected song will be played from the beginning.
< If the . button is pressed once during playback, the
current song will be played from the beginning.
Searching for a part of a track
Hold down
During playback, hold the Skip (
.//) button to
search a part of a song.
Release it when you find the part you want to listen to.
1
Push the “TEAC” mark on the front of this unit
to open the iPod dock.
2
Connect an iPod to the dock.
The iPod automatically turns on and starts playback
from the iPod’s play list.
If an iPod is already connected, press the FUNCTION
button repeatedly to select “IPod”. Playback starts
automatically.
< The battery of an iPod is recharged whenever the
iPod is docked and SR-100i is connected to the AC
power supply.
Some of the iPod devices cannot be recharged
through the dock . For details of recharging
compatibility, see page 8.
< When you turn off the unit with an iPod connected
to the dock, the clock appears on the display and
the iPod battery is charged. If you disconnect the
iPod and no button is pressed for 90 seconds, the
unit is turned off (put in standby) and the STANDBY
indicator lights.
< If headphones are plugged into the iPod, sound
comes out from both the headphones and the
speakers of SR-100i.
Listening to an iPod
iPod