Teac SR-100I - Manual (Page 11)

11
EN
GL
IS
H
A Standby/On ( )/FUNCTION
Use this button to turn the unit on and off (standby).
To turn off unit, hold down this button for more than
3 seconds.
When an iPod is not connected to the dock:
e “ECO PWR” appears on the display for a few
seconds. Then the unit is turned off (put in
standby) and the STANDBY indicator lights.
When an iPod is connected to the dock:
e The clock appears on the display and the iPod
battery is charged. If you disconnect the iPod
and no button is pressed for 90 seconds, the unit
is turned off (put in standby) and the STANDBY
indicator lights.
Use this button also to select a source.
B Play/Pause (
y/J)
In CD, USB or iPod mode, use this button to start or
pause playback.
C Stop ( H)
In CD or USB mode, use this button to stop playback.
D Disc insertion slot
Insert a disc with the printed label side facing you.
E Eject ( L)
Use this button to eject the disc.
F VOLUME ( + / – )
Use these buttons to adjust the volume level.
While setting the clock or the wake up timer, use these
buttons to change the value.
G Display
Displays the clock, track number, etc.
H Remote sensor
When operating the remote control unit, point it
towards here.
I STANDBY indicator
This indicator lights when the unit is in standby mode.
J Speakers (Stereo)
K iPod dock
Push the “TEAC” mark to open the dock. Connect an
iPod to the dock connector.
Push to close the dock when not in use.