Toshiba 27AFX55 - Manual (Page 21)

21
Appendix
Using the TV
’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
W
elcome to T
oshiba
Important
Safeguards
To unlock channels:
1. Press MENU, then press or to display the OPTION menu.
2. Press
▲ or ▼ to highlight LOCK and then press or to display
the LOCK menu.
3. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
4. Press ▲ or ▼ to highlight CH LOCK and press or to display
the CH LOCK menu.
5. Press or to highlight CLEAR, and then press ENTER. This
clears all channels from the list of locked channels.
6. Press EXIT to return to normal viewing.
Locking video input
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, VIDEO3, COLORSTREAM) and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel Numbers unless you clear the setting.
To set up the video lock:
1. Press MENU, then press or to display the OPTION menu.
2. Press
▲ or ▼ to highlight LOCK.
3. Press or to display the LOCK menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press ▲ or ▼ to highlight VIDEO LOCK.
6. Press or to select:
• OFF: Unlocks all video input
sources.
• VIDEO: Locks VIDEO1, VIDEO2,
VIDEO 3, and COLORSTREAM.
• VIDEO +: Locks VIDEO1, VIDEO2,
VIDEO3, COLORSTREAM, channel 3,
and channel 4. This option should be
used if you use the antenna terminal to
play a video tape.
7. Press EXIT to return to normal viewing.
Setting the GameTimer TM
With the GameTimer TM feature, you can automatically activate the
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a
Video game (30, 60, 90 or 120 minutes).
To set up the GameTimer:
1. Press MENU, then press or to display the OPTION menu.
2. Press
▲ or ▼ to highlight LOCK.
3. Press or to display the LOCK menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press ▲ or ▼ to highlight GameTimer.
6. Press or to select a time limit (30 minutes, 60 minutes, 90
minutes, 120 minutes or OFF).
7. Press EXIT to return to normal
viewing. After the GameTimer is set,
the display will appear briefly every ten
minutes to remind you that the
GameTimer is operating.
When the programmed time is
reached, the TV will change channels
automatically.
PICTURE AUDIO SETUP
CH
OPTION
CH LOCK START
SELECT ADJUST
GAME TIMER
START NEW PIN CODE
LOCK
OFF
VIDEO VIDEO+
OFF VIDEO LOCK
PICTURE AUDIO SETUP
CH
OPTION
CH LOCK START
SELECT ADJUST
GAME TIMER
START NEW PIN CODE
LOCK
OFF
OFF 30 60 90 120
VIDEO LOCK
Note:
After programming VIDEO LOCK, change
channel or press the TV/VIDEO button before
turning off the television.
Using the TV
’s
Features
Menu/
Enter
Exit
Channel
Numbers
Menu/
Enter
Exit
Channel
Numbers
J3N12221A(E)_P18-27 4/25/05, 1:27 PM 21