beautypg.com

Tripp Lite B020-008-17 User Manual

Page 23

background image

23

Upgrade Succeeded

After the upgrade has completed, a screen appears to inform you that the procedure was successful:

Click Finish to close the Firmware Upgrade Utility.

Upgrade Failed

If the upgrade failed to complete successfully, a dialog box appears asking if you want to retry. Click Yes
to retry. If you click No, the Upgrade Failed screen appears:

Click Cancel to close the Firmware Upgrade Utility. See the next section, Firmware Upgrade Recovery,
for how to proceed.

Firmware Upgrade Recovery

A firmware upgrade recovery is required in any of the following situations:

• When you invoke Firmware Upgrade Mode (see page 22), but decide not to proceed with the upgrade.

• When the main board firmware upgrade fails.

• When the I/O firmware upgrade fails.

200603055 93-2469 KVM Switch Update.qxd 3/16/2006 1:08 PM Page 23