Texas Instruments MIXED SIGNAL PRODUCTS TPA0103 - Manual (Page 9)

Feature Highlights
1-3 Introduction
1.1 Feature Highlights
The TI TPA0103 Audio Amplifier Evaluation Module and the TI Plug-N-Play
Audio Amplifier Evaluation Platform include the following features:
- TPA0103 Low-Voltage Audio Power Amplifier Evaluation Module
J 535-mW single-ended into 4
Ω
at 5 V L/R channels
J 1.75-W bridge-tied load (BTL) into 4
Ω
at 5 V center channel
J 3.3-V and 5-V operation
J Low distortion (< 0.25% THD+N at full power)
J Ultra-low current consumption in full shutdown mode
J Two sets of stereo inputs with internal MUX
J Module gain adjustable between approximately 2 and 22
- Quick and Easy Configuration with The TI Plug-N-Play Audio Amplifier
Evaluation Platform
J Evaluation module is designed to simply plug into the platform, auto-
matically making all signal, control, and power connections
J Platform provides flexible power options
J Jumpers on the platform select power and module control options
J Switches on the platform route signals
J Platform provides quick and easy audio input and output connections
- Platform Power Options
J Onboard 9-V battery
J External 5-V – 15-V DC V
CC
supply inputs
J External regulated V
DD
supply input
J Socket for onboard 5 V/3.3 V V
DD
voltage regulator EVM
J Onboard overvoltage and reverse polarity power protection
- Platform Audio Input and Output Connections
J Left and right RCA phono jack inputs
J Miniature stereo phone jack input
J Left and right RCA phono jack outputs
J Left and right compression speaker terminal outputs
J Miniature stereo headphone jack output