Toshiba SD-M1711 - Manual (Page 7)

5
Audio Cable (optional) - If you have a sound card and
speakers, and would like to play audio CDs on your
computer, you will need to install a CD/DVD audio cable.
Toshiba's DVD-ROM drives use a standard 4-pin audio
cable that can be purchased from most local computer
suppliers. The sound cable connects to your sound card
at one end and the other end connects to the digital
audio connector at the left rear of the DVD-ROM drive
(see DVD-ROM drive Back Panel photo for location).
Refer to the instructions that came with your sound card
for details on any sound-driver software required.
Figure 5.Installing Audio Cable
Daisy-Chaining - If the DVD-ROM you are
installing is one of two or more SCSI devices
you are connecting to your system, you will
need to use a custom built SCSI interface
cable. Remember that the terminator jumper
on the DVD-ROM drive must have the jumper
installed when the drive is the last device in
the chain.
Figure 6. Daisy-Chaining Multiple Drives