Turbo Air MSR-49G-2 - Manual (Page 13)

REPLACEMENT OF MAIN COMPONENTS
25
6-2 REPLACING DOOR
A. Disassemble top panel as described section 6-1 A,B
B. Remove bottom grille by unscrewing the four screws located on each side
of bottom grille.
C. Open the capacitor cover.
Disconnect the Mullion Heater
REPLACEMENT OF MAIN COMPONENTS
24
E. Pull out the harness located back of top panel.
You can separate top panel out of the unit.
You can replace power switch, lamp switch and display PCB.