How to replace the lamp unit (continued) – Toshiba 46HM84 User Manual

Page 59

Intr

oduction

Connecting

our T

Using the

Remote Contr

Setting up

our T

Using the T

V’s

eatur

Appendix

Index

How to replace the lamp unit (continued)

. Reattach the lamp unit door, making sure to insert the hooks on

the left side of the lamp unit door inside the opening in the TV
cabinet.

. Replace the thumb screw and hand-tighten.

. Plug in the power cord and turn on the TV. After the initial warmup

period (which may take up to several seconds for full picture
brightness), the TV should operate normally. If any of the following
conditions exist, turn off the TV, unplug the power cord, and repeat
steps 1–9 to ensure that the lamp unit and lamp unit door are
installed correctly:

• No picture
• Dark picture
• TV will not turn on

If, after repeating steps 1–9, the problem still exists:

• In the U.S., call Customer Service at 1-800-631-3811.
• In Canada, locate the nearest Toshiba authorized service depot by

directing your web browser to www.toshiba.ca; click “Home
Entertainment,” and then click “Support.”

Thumb screw
(hand-tighten only)

Insert the hooks inside
the TV cabinet opening.

Lamp unit door

NOTE :

Make sure the lamp unit and door is installed

securely; otherwise, the TV may not turn on.