Toshiba 46HM84 - Manual (Page 20)

Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
20
SKIP/SEARCH (DVD only)
Skips back to beginning of current DVD
chapter or locates previous chapters.
SKIP/SEARCH (DVD only)
Skips forward to locate later DVD
chapters.
STOP
Stops the tape or DVD.
PLAY
Begins playback of a tape or DVD.
PAUSE
Press during play or record mode to
pause the picture; press again to restart.
CH y z
y selects the next higher channel;
z selects the next lower channel.
CLEAR (DVD only)
Press to reset the title and chapter
number.
y z x • (DVD only)
Press to navigate DVD menus (may not
work on some DVD players).
GUIDE (CBL/SAT only)
Displays channel guide.
Channel Numbers (0-9)
Press to directly access channels (as
opposed to CH
y z).
INFO (CBL/SAT only)
Displays on-screen information.
POWER
Turns the selected device on and off.
Using the remote control to operate a cable
converter box, satellite receiver, VCR, DVD
player, or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that the remote
control is not preprogrammed to operate, you must first program the
remote control to recognize the device (if you have not already done
so). See pages 18 and 19.
To use your TV remote control to operate a:
• cable converter box or satellite receiver, set the Device Switch to
CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
Note:
Even after the TV remote control is
programmed, it may not operate certain
features on your other device. If this happens
and you wish to use those features, you will
need to use the device’s original remote
control.