TC Electronic G-Natural - Manual (Page 16)

TYPICAL SETUPS
14
Basic settings
•
Set input sensitivity via the levels menu.
• Select active effect pressing the COMP, MOD,
DELAY and REVERB switches
• G-Natural features separate EQ and compression
settings for mic and instrument inputs
Many guitar players have invested in the increasing
amount of dedicated acoustic guitar amps. Either for
excellent monitoring with full control or for amplification in
small clubs.
Connections
•
Connect the output of your guitar’s piezo pickup to
the instrument input of G-Natural
• Connect the left output to the input of your amp
WARNING! When connecting the G-Natural
outputs to microphone inputs on a mixing console,
the phantom power for these channels MUST be
switched off! Otherwise you may damage the
G-Natural circuits.
G-Natural with a dedicated acoustic guitar amp
Guitar with an
active pick-up system Amp for acoustic guitar
algorithm select
mod delay
menu
subdiv comp EQ boost reverb
BANK UP
BANK DN
COMP
1 2 3
MOD DELAY
BOOST
/TAP TEMPO
REVERB
store levels
G•NATURAL
factory
default 4 3 2 1 VARIATIONS
hold to save
boost flanger plate p.pong stomp EQ chorus room reverse dynam tape vibrato analog detune clean thicken
studio tremolo hall spring 3
3 +
+ +
Decay PreDly Color MixMM
1.2s
250ms 100% 25%
edit A edit B edit C edit D
preset bank | tune
Instrument
input
LR outputs
* If the pickup system requires the use of a battery the
system is active.