TC Electronic G-Natural - Manual (Page 11)

9
1 - Line Input
Input for line instruments such as keyboards etc.
Connection type: 1/4” jack.
2 - Instrument Input
Input for:
- Guitar pedal or preamp
- Active pickups (guitar with batteries)
- Acoustic guitar with preamp
- Keyboard output
Connection type: 1/4” jack.
3/4 - Balanced Outputs
Balanced outputs on 1/4” TRS jack. These outputs may
be connected directly to balanced mic inputs with
1/4”TRS to XLR adapters.
WARNING! When connecting the G-Natural
outputs to microphone inputs on a mixing console,
the phantom power for these channels MUST be
switched off! Otherwise you may damage the
G-Natural circuits.
REAR PANEL VIEW
UL60065
EN/IEC 60065
CSA file no:
LR 108093
MIC PASSTHRU
SERIAL NO.
TYPE: TFW001
MADE IN THAILAND
IN THRU IN LINE LEFT RIGHT OUT
MIDI BALANCED INPUTS BALANCED OUTPUTS DIGITAL I/O PEDAL
DI
DO
S/PDIF
100-240V~AC
50-60Hz, 15W
R
C US
THIS CLASS B DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQUIPMENT REGULATIONS AND COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION SUBJECT TO CONDITIONS STATED IN THE MANUAL.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS
OUVRIR.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MIC INPUT
MIC LEVEL
MIC IN
SELECT -20dB LIMITER +48V
INSTRUMENT
5 - Digital I/O - S/PDIF
Sends and receives digital audio to S/PDIF standards on
standard RCA connectors.
6 / 7 / 8 - MIDI In / Thru / Out
Standard MIDI interface.
9 - Pedal In
Several types of external pedals can be connected and
used to control parameters.
- Connect an expression or a volume pedal to control
e.g. volume
For perfect response when using an expression or a
volume pedal, the pedal must be calibrated. This is
done via the pedal menu
- Via the pedal menu you can set up what parameter
the expression/volume pedal should control