Playing a disc, Basic playback – Toshiba SD-5915SC User Manual
Page 20
20
Basic playback
Playing a Disc
This section shows you the basic on how to play
a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
SKIP
PAUSE
STOP
PLAY
MENU
ENTER
OPEN/CLOSE
DISC SKIP
ON/STANDYBY indicator
2
1
2, 4
3
PAUSE
MENU
/
ENTER
STOP
PLAY
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to
the DVD video player.
• Press DVD to select DVD mode.
1
Press the ON/STANDBY button.
The DVD video player turns on.
The ON/STANDBY indicator on
the player illuminates.
2
Press OPEN/CLOSE, place a disc on the disc
tray.
The disc tray opens.
3
Press DISC SKIP to revolve the tray clockwise.
Place an other disc on the disc tray.
With the playback side down.
Place an other disc(s) on the disc holder(s).
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD video player to malfunction.
• Do not place a disc which is unplayable in this
DVD video player.
4
Press OPEN/CLOSE to close the disc tray.
Playback starts.
Players will start to scan and play
from current closed location as the
first location. In case no disc is
available, it will skip to the next tray.
It will stop scanning after completion
of the fifth disc.
If you insert a DVD video disc that contains a top
menu, a menu may appear. See “Locating a title
using the top menu”.
• You may need to press MENU button to display disc
menu (depending on the actual DVD video disc.)
Notes
• If the disc tray contains a disc you have already played,
playback will begin from the location where you last stopped
playback.
• Some Video CD are recorded with PBC (Playback Control),
a menu with recorded contents may appear on the TV if you
have turned the PBC on. You can make your selection
according to its PBC menu. Press MENU button on the remote
control to turn PBC on or off anytime during Video CD playback.
When switching from PBC off to PBC on mode, playback will
start from the beginning of the disc.
To start playback in the stop mode
Press PLAY.
OPEN/CLOSE
OPEN/CLOSE
DISC SKIP
PLAY
Basic playback
DVD
VCD
CD
When the DVD video player is turned on for the
first time, see CUSTOMIZING THE FUNCTION
SETTINGS (page 38 to 44) before proceeding to
step 2.
24
To playback from a specific disc tray number
Press DISC SKIP several times until you see your desired
tray number appears on the DVD display.
DISC SKIP
The disc on the selected disc tray
will be played back automatically.