Technicolor - Thomson DRC600N - Manual (Page 16)

14
B
asic functions
1. Press the open O key to open the disc
compartment.
2. Insert a disc and locate it on the rotary spindle
by applying pressure around the edge of the
disc’s center hole. The printed side of the disc
should face upwards (Audio CD, Video CD,
single-sided DVD
(1) , etc.).
3. Push the flap down until it clicks.
Playback begins as soon as the flap is fully closed.
• With a DVD, the disc menu appears. Press B (playback) to start playback or select another
option (4) , in the disc menu using the Navigation keys. To validate your selection, press B
(playback).
• With an audio CD or video CD, use the B (playback) key to start it playing.
To go to a chosen track on a CD, or to a title or chapter on a DVD, press the osd key which brings
up a banner on the screen (
❖ page 11).
To stop playback momentarily (2) press stop L once. Press twice to stop it completely (3) .
Loading a disc
Playing a disc
Double-sided discs have a small label on both sides near the center. With most DVDs, a disc-specific menu
appears. In that case, follow the instructions.
The player has memorized the last scene on the
disc. If you now press
B : playback starts from
this point. To erase “ Resume memory ”, press
stop L.
Resume memory does not work with interactive
discs (without elapsed play time information).
If the player is left in STOP mode for more than
2 minutes without any user interaction, a screen
saver will be activated (fade in / fade out). After
about 30 minutes have elapsed in STOP mode
without user interaction, the player will be
automatically switched off.
Depending on the DVDs, it may be possible to
change the language during playback
(
❖
page 22).
Loading a “single-sided” disc.
2. 3.
4.
1.
Graphics contained within this publication are for
representation only. Your unit might differ.
DTH600_US 8/8/02 10:22 AM Page 14