Tektronix PHASER 850 - Manual (Page 43)

32 Phaser 850 Color Printer
Automatic two-sided printing
Automatically make two-sided prints using the paper trays or the
manual-feed slot. In the Print dialog box, select the two-sided printing
option and a binding preference (how the page turns).
To automatically make two-sided prints:
■ Do not place paper that was printed on one side back into the
printer to print on the second side. Pre-printed pages may stick
together.
■ Make sure the Paper/Transparency switch on the tray is set
to Paper.
■ Use only Letter- or A4-size paper.
■ When the printer operates in automatic two-sided printing mode,
the paper partially exits before printing the second side. To avoid
paper jams, do not touch the paper before it completely exits the
printer.
Caution
Two-sided printing is supported only for Letter- and A4-size
papers within the 16 - 32 lb. range. Make sure two-sided
printing is off in the printer driver for all other paper types.
Macintosh Drivers
LaserWriter 8.6 ■ From the File menu, select Print.
■ From the pull-down menu, select Layout.
■ Select Print on Both Sides.
■ Select a binding preference.
LaserWriter 8.3.4 ■ From the File menu, select Print.
■ Click the Options button.
■ Select 2-Sided Printing.
■ Select Short-Edge Binding or Long-Edge Binding.
2-sided Prints