Topfield TF 7720 HSCI - Manual (Page 37)

4.1 Searching broadcasting services 31
2. Enter your location to the My Longitude option and the
My Latitude option with the
✄
✂ ✁
V − ,
✄
✂ ✁
V + and numeric but-
tons.
3. Enter the position of your selected satellite to the Satellite
Angle option if it is not correct.
4. Select the Goto the position option; then the antenna
will turn toward your selected satellite as calculating its
position.
5. If the receiving quality, which is displayed at the bottom
right of the screen, is not good, then tune the antenna
finely with the Move option. The changed position is
automatically saved. At this time you had better check
the receiving quality of every transponder and choose
the best one at the Transponder (or Frequency) option. It
will be helpful to your fine tuning.
4.1.4 Searching services
To perform service search, select
the Installation > Service Search
menu. You should see a screen
like the left figure.
There are four service search methods:
• Searching every service of a satellite.
• Searching every service of a transponder.
• Searching one service of a transponder.