2 camera configuration, 1 searching and entering the camera, Camera configuration – Toshiba IK-WB11 User Manual

Page 4: Earching and entering the camera

Text mode
Original mode

Toshiba IK-WB11 Camera Installation & Configuration Guide

2 Camera configuration

To begin the configuration of the camera you should use the Camera Finder application.
Camera Finder is an application for searching network cameras. You can use it by
downloading it from the Toshiba website on the following link:

http://www.toshiba.com/taisisd/security/support/support_dloads.jsp

2.1 Searching and entering the camera.

To configure а camera follow the steps below:

1. Download Camera Finder using the link above. Open the Setup file and follow the

onscreen instructions to install the Camera Finder application.

2. After the installation is complete, go to Start->Program->TOSHIBA Network

Camera item.

Camera Finder Screen

Version 3.0 Series