Topcom Butler 2000 C - Manual (Page 53)

Butler 2000 C
• “VOLUME” appears on
the display.
• Press the OK-button, the
menu “VOLUME” is selected.
• The present volume
“VOLUME 1” is shown
on the display.
• Press the Function
button. On the display the volume levels 1 to 9
are shown.
• Select the desired volume level and press the OK
button.
• The unit returns to the
“H-EXT RING” menu.
6.4.2 Internal Ring Volume and Melody
Setting the internal ring volume and melody has to
be done the same way as setting the external ring
volume and melody. You only have to select the
menu “H-INT RING”.
6.5 Key click ON/OFF
It is possible to set the handset in such a way that
you hear a tone every time a button is pre s s e d .
• Press the Function button
until “H-KEY CLICK” is
shown on the display.
• Press the OK button.
• The present setting
appears on the display.
• Press the Function
button, select the
desired setting.
• Press the OK button to
confirm.
• The unit returns to the
“H-KEY CLICK” menu.
6.6 Handset PIN code
The new handset PIN code will only replace the
current one, if the new PIN code is entered correctly
twice and if the procedure is not interrupted. If you
change the PIN code 1590, please memorize your
new PIN code!
6.6.1 Changing the Handset PIN code
• Press the Function button
until “H-CHANGE PIN”
is displayed.
• Press the OK button.
• “PP PIN:” is displayed.
• Enter the current PIN
code and press the OK
button.
• When “NEW PIN” is
displayed, enter the new
handset PIN Code and
press the OK button.
53 53 53 53 53 53 53 53 53
H--KEY CLICK
PP PIN :
NEW PIN :
H--CHANGE PIN
H--EXT RING
VOLUME 1
H--KEY CLICK
CLICK ON
VOLUME
B2000C 10/9/01 11:32 am Page 53