Topcom Butler 2000 C - Manual (Page 47)

Butler 2000 C
5.11 Handset Lock
When the handset is locked, outgoing calls are no
longer possible. Incoming calls can still be received
without any problem.
• If you want to lock a
handset, press and hold
the Lock button for
1 second.
• To deactivate the handset lock, press the Lock
button briefly.
5.12 CALLER-ID/CLIP Function
When the unit receives a phone call, the caller’s
phone number is shown on the handset’s display. The
unit receives calls in FSK (name, telephone number,
date and time of a call)* as well as in DTMF (tele-
phone number only). The phone can save 20 calls
which can be reviewed later. It never saves the same
call twice. When the memory is full, the old calls will
be replaced by the new ones in the memory.
* only if the telephone provider sends through the
name, the date and the time together with the tele-
phone number !!
5.12.1 Calling a number from the Call list
• P ress the Function button
until “CALLER ID” is
shown on the display.
• Press the OK button. The
name and number of the
last received call appears
on the display.
• Press the ‘3‘ or ‘4‘ button and the calls in the
Call list appear in chronological order.
• Press the Hookswitch button when the desired
number/name is shown on the display. The
number will be dialled automatically.
5.12.2 Erasing a number from the Call list
• Press the Escape button to erase the telephone
number shown on the
display.
• Press the OK button
when “DELETE MSG” appears on the display.
5.12.3 Erasing all numbers from the Call list
• Press the Escape button when you are in the
Call list.
• Press the Function
button. “DELETE ALL”
appears on the display.
• Press the OK button.
All numbers from the Call list have been erased.
Note : When there are no calls in the Call list,
“EMPTY” is shown on the display.
47 47 47 47 47 47 47 47 47
C A L L E R - I D
091120010
DELETE MSG ?
DELETE ALL ?
LOCK
B2000C 10/9/01 11:32 am Page 47