Care and cleaning, Stainless steel surfaces, Aluminum and plastic surfaces – Thermador HDDW36FS User Manual
Page 8

PAGE 8
CARE AND CLEANING
IMPORTANT: Do not clean the hood with abrasive
sponges or with cleaning agents which contain sand,
soda, acid or chlorine!
ṇ
CAUTION. Avoid risk of crushing. Do not catch hand
between the filter brackets. Do not insert the filter drawer
while cleaning it.
❑ When cleaning the grease filters, remove grease
deposits from accessible parts of the housing.
This prevents the risk of fire and ensures that the hood
continues operating at maximum efficiency.
❑ Note: Do not use alcohol (spirit) on plastic surfaces,
as dull marks may appear.
Caution: Observe all instructions and cautions
provided with cleaners.
IMPORTANT: Clean the operating buttons with a mild
soapy solution and a soft, damp cloth only.
Do not use stainless-steel cleaner to clean the operating
buttons.
Stainless steel surfaces:
❑ Use a mild non-abrasive stainless steel cleaner.
❑ Clean the surface in the same direction as it has been
ground and polished.
❑ We recommend the stainless steel cleaner Fantastik
®
or Formula 409
®
sprayed onto a paper towel.
Aluminum and plastic surfaces:
❑ Do not use dry cloths.
❑ Use a mild window cleaning agent.
❑ Do not use aggressive, acidic or caustic cleaners.
Observe the warranty regulations in the enclosed
service booklet.
ṇ
WARNING. To avoid risk of fire and explosion do not use flammable liquids or solvents.
Always unplug or disconnect the appliance from the power supply before servicing.
ṇ
Do not insert the filter drawer while cleaning it.
Danger of crushing!
❑ Clean the hood with a hot soap solution or a mild
window cleaner.
❑ Do not scrape off dried-on dirt but wipe off with a
damp cloth.