Toshiba 1700 - Manual (Page 9)

TOSHIBA
9
2) The input power source voltage and frequency must be within
the allowable range as specified in appendix A. Voltages and
frequencies outside of the permissible tolerance range may
cause internal protection devices to activate.
3) The UPS should not be used with a load whose rated input is
greater than the rated UPS output.
4) Do not use the UPS to provide power to motors that require high
starting current or that require a long starting time such as
vacuum cleaners and machine tools (unless appropriate sizing is
done by a Toshiba applications engineer, or other qualified
personnel).
5) Do not insert metal objects or combustible materials in the unit's
ventilation slots.
6) Do not place, hang, or paste any objects on the top or on the
exterior surfaces of the UPS.
External Layout
Electronics Module
Figure 1
Electronics Module Layout