Setting the identification code, Optical mouse – Targus PAKP003U User Manual

Page 5

Text mode
Original mode

Targus wireless keypad and opitcal mouse combo

Setting the Identification Code

After your computer detects the USB receiver you must set
the ID code between the receiver and the mouse as well as
between the receiver and the keypad BEFORE you can use
them. To do this, do the following:

NOTE: Make sure that your computer is turned on and
has detected the USB receiver before you set the ID
code.

Optical Mouse

1 Press and release the setup key on the receiver. The

Lock LED light turns off.

2 Press the setup key on the bottom of the mouse.

When the LED on the receiver is lit, the mouse is set up
with an ID and the receiver is locked.

You are now ready to use the mouse.

power swtich

Setup Key