Tascam CD-500/500B - Manual (Page 2)

2
TASCAM CD-500/500B
CD-500/500B
Release Notes
4) Press the unit’s PITCH [MENU] knob once to show
OLD XXXX
(current version) on the display.
Press it again repeatedly to show
NEW XXXX
(update version), followed by SURE and then
UPDATE to start updating.
Current version
Update version
Update confirmation
Updating in progress
5) After updating completes,
COMPLETE
appears
on the display.
6) Press the EJECT button to eject the update data
CD, and then turn the power off.
4 Confirmation of firmware version
Follow the “Confirmation of firmware version”
instructions above to check that the system
firmware version is now the most recent version of
the firmware.
This completes the procedure for updating this unit.