Operation – Tripp Lite B004-DUA4-K-R User Manual
Page 6

6
Command
Hotkey
Description
Unbind
Computer and
Hub Switching
[Scroll Lock] [Scroll Lock] [X]
Unbinds computer and hub
switching, allowing you to access
one computer while the focus of
the hub is on the other.
Bind Computer
and Audio
Switching
[Scroll Lock] [Scroll Lock] [Q]
Binds computer and audio
switching together. This is
enabled by default.
Unbind
Computer
and Audio
Switching
[Scroll Lock] [Scroll Lock]
[W]
Unbinds computer and audio
switching, allowing you to access
one computer while listening to
audio from the other.
Next Lower
Computer Port
[Scroll Lock] [Scroll Lock] [↑]
or
[Scroll Lock] [Scroll Lock]
[Backspace]
Switches the KVM focus to the
computer directly prior to the
currently selected computer.
Next Higher
Computer Port
[Scroll Lock] [Scroll Lock] [↓]
Switches the KVM focus to
the computer directly after the
currently selected computer.
Define Hotkey
Preceding
Sequence
[Scroll Lock] [Scroll Lock]
[H] [x]
x = [Scroll Lock], [Caps
Lock], [Num Lock], [Esc]
or [F12]
Selects which key will be used for
the hotkey preceding sequence.
The default is [Scroll Lock].
Auto Scan
[Scroll Lock] [Scroll Lock] [S]
Initiates an Auto Scan at a scan
interval of 5 seconds.
Auto
Scan with
Programmable
Scan Interval
[Scroll Lock] [Scroll Lock]
[S] [x]
x = 0 through 9
1 = 10, 2 = 20, 3 = 30,
4 = 40, 5 = 50, 6 = 60,
7 = 70, 8 = 80, 9 = 90,
0 = 100
Initiates an Auto Scan at the
chosen scan interval.
Exit Auto Scan
Press any key on the
keyboard, or the KVM
pushbutton
Stops an Auto Scan at the
selected computer.
Turn Beeper
On/Off*
[Scroll Lock] [Scroll Lock] [B]
Turns beeping sound on or off
*B004-DUA4-K-R only
Operation
continued
201107247 93-3129.indd 6
9/9/2011 2:33:30 PM