Taylor 9715L - Manual (Page 2)

When the ‘Low Battery’ icon indicates the battery is low, the battery should be replaced immediately
with 2 ­ AAA, 1.5V batteries. Please note: It is important to turn the instrument off before replacing the
batteries, otherwise the thermometer may malfunction.
When replacing the batteries, do not mix old and new batteries. Do not mix alkaline standard
(carbon­zinc) or rechargeable (nickel­cadmium) batteries. Dispose of batteries properly. Do not dispose of
unit or batteries in fire, as batteries inside this unit may explode or leak. Keep away from children.
STORAGE & CLEANING
The sensor lens is the most delicate part of the thermometer. The lens should be kept clean at all times. Take care when
cleaning the lens, using only a soft cloth or cotton swab with water or medical alcohol, and allow the lens to fully dry
before using it. Do not submerge any part of the thermometer. The thermometer should be stored at room temperature
between ­4 to +149°F (­20 to +65°C).
SPECIFICATIONS
Measurement Range ­67~662°F (­55 to +350°C)
Operating Range 32~122°F (0~50°C)
Accuracy (Tobj=15­35°C,Tamb=25°C) +/­1.8°F (1.0°C)
Accuracy (Tobj=­33~350 o C, Tamb=23 ± 3 o C) ±2% of reading or 4°F (2°C) whichever is greater
Resolution ­67.0~390.0°F) (­55.0~199.9°C) 0.1°F / 0.1°C (switchable)
Response Time (90%) 1 second
Distance:Spot 6:1 optics ratio
Emissivity Range 0.95 default – adjustable 0.05 to 1.00 emissivity
Battery Life Typically 40hr, minimum 30hr (auto power off after 15 seconds)
Battery 2 ­ AAA
Dimensions 24.5 x 43.5 x 113.5mm(1.0Ч1.7Ч4.5 inch)
Weight 3.2 oz (90 grams) including batteries
EMC/RFI
Readings may be affected if the unit is operated within a radio frequency electromagnetic field strength of approximately
3 volts per meter, but the performance of the instrument will not be permanently affected.
One Year Limited Warranty
Taylor warrants this product to be free from defects in materials or workmanship for one (1) year
from date of original purchase. It does not cover damages or wear resulting from accident, misuse,
abuse, commercial use, or unauthorized adjustment and/or repair.
If service is required, do not return to distributor. For service, call between 7:30 AM and 4:30 PM,
Mountain Standard Time, Monday through Friday. To assist us in service you, please have the
model number and date of purchase available. Should this product require service (or replacement
at our option), please pack the item carefully and return it prepaid, along with receipt showing date
of purchase and a note explaining reason for return to:
Taylor Precision Products
2220 Entrada del Sol, Suite A
Las Cruces, New Mexico 88001
Customer Service Phone: 1­800­225­4834
Customer Service Fax: 1­575­526­4347
www.taylorusa.com
There are no expressed warranties except as listed above. This warranty gives you specific legal
rights, and you may have other rights which vary from state to state.
.
© 2006 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor® and
Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products and its
affiliated companies. All rights reserved.
Made to our exact specifications in China.