beautypg.com

Topcom 115 User Manual

Page 4

background image

Topcom LAN – 10/100Mbps Ethernet Network
Adapter

The 10/100Mbps Ethernet Network Adapter is a dual-speed
adapter with a single auto-negotiation 10/100Mbps RJ-45
connector. Full-duplex operation is supported. When the card
is running with the full-duplex mode, the speed can be
boosted to 20Mbps/200Mbps.

Installation

Hardware Installation

1.Please turn OFF the computer. Unplug the power cord and

open the computer case.

2.Install the Topcom LAN Card in a free PCI bus master

expansion slot.

3.Connect the network cable and reconnect the computer’s

power cord.

4. Turn the computer ON.

Driver Installation

The computer will find new hardware. The driver for each
networking operating system is under a separate directory on
the installation disk.

For the newest drivers, please check at www.realtek.com.tw

Handl Lan Card 115 18-11-2002 15:08 Page 4