Telex SPK-2000 - Manual (Page 2)

SPK-2000 Specifications
General
Power Requirements:
12 to 15 VDC, 65 to 150 mA
Frequency Response:
400 Hz to 8 kHz, ± 3 dB
Input Impedance:
47K ohms, minimum
Input Level:
1 VRMS, nominal
Output Amplifier Power:
4.4 W maximum; 2 W continuous
Signal-to-Noise: 75 dB (ref 2W into 8 ohms)
THD
Less than 0.5% at 2W
Balance Control:
12 dB maximum relative attenuation
Dimensions:
1.75” (44.5 mm) high, 8.25” (209.6 mm) wide, 5.25” (133.4 mm) deep
Environmental:
0°C to 50°C; 0% to 95% humidity, non-condensing
Ordering Information
SPK-2000
Self powered speaker, 5 watt output
Catalog Number: 90007629000
This specifications information is preliminary and is subject to change without notification.
Brand names mentioned are the property of their respective companies.
Contact Information
Telex Communications, Inc.
12000 Portland Avenue South
Burnsville, Minnesota 55337
Telephone: (800) 392-0498
Fax: (800) 323-0498
Form Number: 9350-7629-000
Date: February, 2006