Trimble Outdoors AgGPS 332 - Manual (Page 35)

AgGPS 332 GPS Receiver User Guide 25
Connecting the Receiver 3
3.5
System Components
Mount the receiver on a level, flat surface. To mount it on a ceiling,
contact your local Trimble Reseller for the appropriate bracket. Place
the antenna upright with the magnetic base on a flat metal surface.
Note – A metal combine grain tank extension can block satellites.
Figure 3.2 shows the recommended location for sprayer boom
applications.
Figure 3.2 AgGPS 332 receiver antenna mounting for ground sprayer
boom applications
35.1
The receiver
To mount the AgGPS 332 receiver:
1. Drill four holes in the mounting surface. Use the slotted holes in
the mounting brackets as a template.
2. Use screws to secure the brackets to the mounting surface.
Boom centerline
Application boom
Antenna