Trimble Outdoors AgGPS 332 - Manual (Page 118)

D Third-Party Interface Requirements
1 08 AgGPS 332 GPS Receiver User Guide
SoilTeq Falcon II
Controller NMEA GGA, VTG 9600,
19.2K 8-N-1 5 Hz, 10
Hz 30945,
40947-18
SoilTeq Falcon VR
Controller NMEA GGA, VTG 9600 8-N-1 5 Hz 30945,
40947-18,
46441
SoilTeq Falcon VR
Controller
with Falcon
Track LBAR NMEA GGA, VTG 9600,
19.2K 8-N-1 5 Hz, 10
Hz 30945,
40947-18
Springhill Ag
Navigator
RTCM 9600 8-N-1 10 Hz 30945,
40947-18 Connect to COM1.
Make sure Pin 9 is
not connected.
Starlink LB-3, LB-4,
LB-5 NMEA GGA, VTG 19.2K 8-N-1 5 Hz, 10
Hz 30945,
40947-18
TeeJet GuideLine NMEA GGA 19.2K 8-N-1 5 Hz 30945,
40947-18
Terradox Sitewinder NMEA GGA 9600 8-N-1 5 Hz 30945,
40947-18
Trimble AgGPS
Autopilot
(DGPS) TSIP 38.4K 8-N-1 5 Hz 43172 Connect to Port A on
AgGPS 132.
Firmware version 2.0
and later
automatically
configures the
AgGPS receiver port
communication.
Trimble AgGPS
Autopilot
(RTK) GSOF 38.4K 8-N-1 5 Hz 43172 Connect to Port A on
AgGPS 214.
Firmware version 1.1
and later
automatically
configures the
AgGPS receiver port
communication.
Trimble TrimFlight™
GP400 RTCM 9600 8-N-1 1 Hz 34903
Trimble TrimFlight
MMD NMEA GGA, VTG 9600 8-N-1 5 Hz 30945 Connect to male DB9
port on MMD.
Trimble TrimFlight
TF300 RTCM 9600 8-N-1 1Hz 34903
Company Hardware Protocol NMEA
messages Baud
rate Other Pos rate Cable P/N
required Notes