Tally Genicom Tally Mono Laser 9025N - Manual (Page 213)

2
Setting Up the Printer A.3
system requirements A.2
manual feed mode, use 4.12
memory DIMM, install E.3
Multi-Purpose Tray, use 4.8
N
network antenna, connect 2.12
network interface card, install E.6
network printing
cable/antenna, connect 2.12
card, install E.6
locally shared printer, set D.3
network-connected printer, set D.5
parameters, configure D.6
n-up printing 5.13
O
option E.3
option, install
memory DIMM E.3
network interface card E.6
paper tray 2 E.10
serial interface card E.6
optional tray, install E.10
orientation, select 5.3
output location, select 4.5
overlay, use 5.21
P
paper
choose 4.2
load 2.6
sizes and capacities 4.3
specifications F.3
paper jam
around the toner cartridge 7.10
in the duplex area 7.13
in the paper exit area 7.12
in the paper feed area
Multi-Purpose Tray 7.9
optional Tray 2 7.8
Tray 1 7.7
tips for avoiding 7.14
paper level bar 4.7
paper properties, set 5.7
paper size,set 5.7
paper source, set 5.8
paper type, set 5.8
parallel cable, connect 2.10
poster printing 5.16
PostScript driver
access, in Windows B.4
errors 7.24
install, in Macintosh A.2
install, in Windows B.2
preprinted paper, print 4.21
print order, set 5.28
print quality problems 7.15
print quality problems, solve 7.15
print resolution, set 5.25
printer software
install
in Macintosh A.2
in Windows 2.17
reinstall
in Windows 2.19 , B.3
uninstall
in Windows 2.19
printing
booklets 5.17
configuration page 6.2
demo page 2.14
double-sided 5.11
fitting to a selected paper 5.15
from Macintosh A.6
from Windows 5.2
multiple pages on one sheet 5.13
posters 5.16
reduced/enlarged document 5.14
using overlays 5.21
watermarks 5.18
printing problems 7.3
problem, solving
checklist 7.2
DOS 7.24
error messages 7.20
general 7.3
Macintosh 7.23
paper jams 7.7
print quality 7.15
PS errors 7.24
Windows 7.22
Q
quality problems, solve 7.15
R
rear output tray, use 4.6