Clock setting, Auto clock setting, Auto clock adjustment to set auto clock to off – Toshiba MW30G71 User Manual
Page 21
![background image](/manuals/215127/21/background.png)
21
Basic setup
• Depending on the reception
condition, it may take approx. thirty
minutes.
• The POWER indicator will light.
Clock setting
The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.
Preparation:
• Connect the antenna or cable TV system.
• If you use a cable box, turn it on.
• Plug the AC power cord to the AC outlet.
Auto clock setting
Make sure the unit is turned off.
• If you press POWER, the Auto Clock
set is not effective.
1
Wait at least three minutes and press POWER.
2
Press TV/VCR to select TV/VCR mode. Then
press DISPLAY to check the clock on the
screen.
3
If the clock is not set, check the antenna
condition. The Auto clock may not function
properly if the reception condition is not
good.
4
Auto clock adjustment
To set auto clock to OFF
The Auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
• If you use a cable box and you want Auto clock adjust-
ment to be performed, the cable box must be left on.
• The Auto clock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):
Press MENU in the TV/VCR mode, then press
or
to select TV SETUP
menu.
1
Press
or
to select “AUTO CLOCK”.
2
Press
or
to select “OFF”.
3
Press RETURN to make the menu screen
disappear.
• When the AUTO CLOCK is set to
“OFF”, the Auto Clock adjustment
does not function.
• Set the clock manually
23
.
4
Notes:
• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,
etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
• The TV section has its own menu and also DVD section has
its own menu
$'
.
• If no buttons are pressed for more than 15 seconds, the TV/VCR
menu screen will return to normal TV operation automatically.
POWER
MENU
00:00:27 SP
TV/VCR
8:47AM SAT
002
ANT
CABLE
T V S E T U P
L A N G U A G E
E N G L I S H
C L O C K S E T
A U TO C L O C K
O N /
O F F
S TA N D A R D T I M E
D AY L I G H T
S AV I N G T I M E
A U TO
: S E L E C T
: A D J U S T
R E T U R N : E N D
TV/VCR
C/D/B/A
DISPLAY