Targus External Cardbus Drive - Manual (Page 10)

10
Targus External Cardbus Drive
Using the Drive
Inserting and Removing a Disc
1 Turn on your computer and press the eject button to open the media tray.
2 To insert a disc, hold it by the edges and place it in the tray with the readable (plain) side
down. If you are using a high capacity disc, place the side of the disc you want the drive to
read facing down. Then, gently press down on the disc until it snaps into place.
3 To remove a disc, grasp it by the edges and gently pull up until the disc is released.
CAUTION: Avoid touching the readable (plain) side(s) of a disc. Touching the readable side of the
disc may cause read errors, poor performance or failed operation.
4 Close the media tray by gently pushing it until it clicks into place.
Cardbus drive
Optional power connection
Audio out jack
Emergency
Media tray
eject hole
PC Card
cable port
Eject button
Indicator light